The Fireplace Radiator is a solid cast iron workhouse designed to
give you years of use. It will heat your home while keeping the
beauty of your fireplace and open wood burning ambiance.
It takes about 20 minutes to set up and that includes taking it out
of the box. Once installed, you will notice that the fan draws in
cool air from the floor and pushes it through the plenum where it is
heated by your wood burning fire. As the air moves through, it picks
up the heat and delivers it into your home through front air diverter
bar. It is really quite simple and ingenious. You may install it
with existing glass doors and mesh screens to keep the beauty of your
fireplace and your home. The Fireplace Radiator fits into just about
all fireplaces The small fan (UL listed motor) has a variable speed
control and is extremely quiet. During the warmer months, you can
simply remove the fan and leave the Fireplace Radiator in place.
All fireplaces are good conductors of heat but over 90% of that
heat literally goes right up the chimney. Our Fireplace
Radiator corrals that heat and sends it back to you. Thermostats can
be turned down or off which means lower heating bills immediately. As
long as you have even an amber burning, it will continue to give you
heat. What are you waiting for? Order it today before the next cold
front.
All metal and cast iron parts are warranted for five years from
date of purchase. All electrical parts are warranted for one year from
date of purchase. We only ship brand new, in-the-box Fireplace
Radiators.
Will
it fit into my fireplace?
The Fireplace Radiator fits just about all
fireplaces. The powerful fan can be ordered so that it is
located on either the left side or the right side of your
fireplace. (closest to electrical outlet) This unit isn't BTU rated
since you control the amount of heat being generated by the size of
your fire and speed adjustment of the fan. The fan box has a
variable speed control and is very quiet.
The Fireplace Radiator must be installed in wood burning masonry
fireplaces with a fire box having a depth of no less than 16 1/2
inches and no more than 26 inches. (Your fireplace can be deeper but
the unit will extend to 26 inches in depth.) It is designed to work
with a fireplace that has an opening of no more than 51 inches. The
plenum (the large piece that sits at the back of your fireplace) and
side tubes are made of virtually indestructible cast iron. The plenum
is 18 1/4" wide, 11" tall and 3" thick. Your fire is built right on
the side tubes of the Fireplace Radiator which are 17 1/2 inches
apart on the outside and 11 inches on the inside of the tubes which
means you don't need a grate.
Firepits
